Bristle Blaster®

The Only Hand Held Tool In The World Which Achieves Surface Cleanliness Equivalent To Sa 2½ – Sa 3 With An Anchor Profile Up To 120 Micron.

• Removes Corrosion, Coatings And Mill Scale
• Surface Preparation Equivalent To Sa 2½ – Sa 3 Per Iso 8501-1
• Anchor Profile Of Up To 120 Ɥm Rz
• Atex-Approved For Use In Zone 1 (Potentially Explosive) Atmospheres In Accordance With Ex Ii 2G C Iia T4 X
• Cost Effective – No Expensive Set Up, Containment Or Clean Up Required
• Eco-Friendly And Safe To Use
• Ideal For Spot-Repairs, Touch-Up Jobs And Weld Seam Preparation
• Does Not Generate Heat Or Grind Substrate
• Patented Accelerator Bar

• Patented Air Cooling System Extends The Life Of The Bristle Blaster® Belts
• Atex-Approved For Use In Zone 1 (Potentially Explosive) Atmospheres In Accordance With Ex Ii 2G C Iia T4 X
• Lean And Extremely Lightweight Design (1,200 Grams) Improves Accessibility
• Dust Exhaust For Adapting An Industrial Vacuum Cleaner
• Special Gear Reduction Increases Torque At 2,300 Rpm
• Muffler Reduces The Sound Pressure Level

Our Drive Units Are Specialist Proprietary Tools Designed Specifically For Use With Bristle Blaster® Belts. The Patented Accelerator Bar Is Necessary For Achieving The High Level Of Surface Roughness (Anchor Profile) And Surface Cleanliness.

Designed For Professional Use, Bristle Blaster® Drive Units Meet The Highest Standards For Quality And Durability. Their In-Line Design Makes Them Ideal For Working In Areas That Are Difficult To Reach. The Low Rotational Speed Of 2,300 Rpm And The Lightweight Compact Design (1,200-2,300 Grams) Ensures A High Degree Of On-Site Safety And Easy And Flexible Of Handling.

The Patented Bristle Blaster® Technology Is Used In Numerous Industries And Especially Where Conventional Blasting Methods Are Not Possible Or Uneconomic.

The Bristle Blaster® Combines The Flexibility And The Short Set-Up Times Of A Hand-Held Tool With The Results Otherwise Achieved With Blasting: Surface Preparation Grades Comparable With Sa 2½ – Sa 3 And Roughness Levels Of Up To 120 Μm Rz. This Makes Our Technology The Perfect Surface Preparation Method For Spot-Repairs, Touch-Up Jobs And Preparing Welds.

Technical Specifications

Length – 350Mm
Height – 160M
Width – 70Mm
Weight – 1.1Kg

Belt Diameter (Outer) – 110Mm
Required Flow Pressure – 90 Psi
Average Air Consumption – 0.5M^3/Min
Idle Speed (+/- 5%) – 3500 Rpm
Threaded Air Inlet – Rp 1/4″
Required Hose Diameter (Interior) – 3/8″
Vibration – 2M/S^2
Sound – 83 Db(A)

Bristle Blaster® Pneumatic Set Sp-647-Bmc

Includes

• Bristle Blaster® Pneumatic Drive Unit
• Adapters 23 Mm & 11 Mm
• Accelerator Bars Carbon Steel 23 Mm & 11 Mm
• 5 X Bristle Blaster® Belts 23Mm
• 5 X Bristle Blaster® Belts 11Mm
• In Line Air Regulators 23Mm (Silver) & 11Mm (Blue)
• Dust Extraction Attachment
• Monti Blow Mould Case