Prep & Repair Bondall Concrete Flooring Other | Gripset Betta Concrete Crack Filler Repair 1 Litre

Product Info

Concrete Crack Filler Is A Unique Solvent Free Crack Sealer Designed To Protect Cracks And Joints In Concrete Pavements Against Water Ingress And The Breakdown Of Pavement Surfaces. Concrete Crack Filler Penetrates Into The Depth Of The Crack, Filling The Void And Sealing Against Moisture And Water Vapours. Once Dried It Forms A Tough Flexible Seal That Withstands Ponding Water And Vehicle Traffic.

Colour: Grey

Sizes: 500Ml, 1 Litre

Features & Benefits

• Solvent Free And Non Flammable
• Penetrates And Fills Crack Depth
• Prevents Weeds And Plant Growth Through Sealed Cracks
• Excellent Adhesion To New And Aged Concrete Surfaces
• Prevents Build Up Of Dirt And Foreign Matter In Concrete Joints
• Excellent Water And Weather Resistance
• Trafficable After 30 Minutes In Normal Ambient Conditions (20 Degrees C)

Uses

• Sealing Cracks On Concrete Pavements
• Sealing Saw Cut Concrete Joints
• Filling And Sealing Control Joints
• Sealing Between Concrete Pavements And Utilities
• Sealing Around Poles, Posts And Other Penetrations In Concrete Surfaces

How To Use

Surface Preparation

• Surfaces Must Be Clean, Sound And Stable
• Surfaces Must Be Free From Moss, Grime, Oils, Petrol/Diesel Residues, Animal Fats Or Grease
• Remove Dust And Loose Matter In Cracks And Joints By Blower Or Vacuum
• If Concrete Is Loose Or Unstable, Repairs Should Be Made Before Crack Sealing Commences

Coverage / Directions

• As A Guide 1 Litre Will Seal 5 – 10M Of Crack Depending On Width & Depth
• It Is Not Recommended To Fill Cracks That Are Wider Than 15Mm Wide
• Concrete Joints With A Depth Greater Than 40Mm Require A Foam Backing Rod Inside Depth Of Joint Before Filling

Drying Time

• In Normal Ambient Conditions Of 20C The Concrete Crack Filler Will Be Dry Within 15 Minutes, Ready For Vehicle Traffic After 1 Hour
• In Cooler Conditions, Drying May Be Prolonged

Tips

• It Is Recommended To Check The Surface Condition Of The Seal After 24 Hours. If Any Signs Of Shrinkage Are Evident, Re-Apply Concrete Crack Filler To The Surface Until The Joint Is Filled And All Shrinkage Areas Are Covered.